NMEA2000 커넥터 CAN 터미네이터

우리는 연결된 보트용 솔루션을 구축하는 NMEA 2000 커넥터 및 케이블 인증 회사입니다. 설치용 NMEA 케이블과 NMEA T 크로스를 제작하고 있습니다. NMEA 2000 드롭 케이블, NMEA T 커넥터, NMEA 유선 커넥터, NEMA T-크로스, NMEA 백본, NMEA 2000 저항기 및 NMEA 터미네이터 ...더 보려면

NMEA 2000 Network Terminator NMEA2000 Terminating Resistor NMEA2000 Terminator NMEA 2000 N2K Termination Resistor M12 IP67 Waterproof for Garmin Networks Backbone Cable Terminator for Lowrance Network NMEA2000 Terminator for Lowrance Network Marine NMEA 2000 Terminator 120 Ohm NMEA 2000 Micro Termination Resistor NMEA 2000 Male Termination Resistor NMEA2000 Backbone Terminators Suitable for NMEA 2000 networks, for Lowrance networks, for Simrad networks, for B and G networks, for Navico networks, for Garmin networks. MEA 2000 T-type tap Micro or Mini type T-type adapter is mainly used in the increase and connection of NMEA 2000 communication network electronic equipment It is suitable for the two-way connection of communication and control between the main line and the branch line , is one of the most critical connectors for on-site communication and control networks of ships or yachts. NMEA 2000 termination resistor NMEA 2000 M12 or 7/8 inch connector termination resistor, usually a 120 ohm resistor is integrally formed inside the connector, and installed or applied to the end of the NMEA 2000 line. Used to absorb reflected waves on the network, effectively enhancing signal strength. Because the signal suddenly encounters little or no cable impedance at the end of the transmission line, that is, the impedance is discontinuous, the signal will cause reflections at this place. Premier Cable CO LTD design and manufacture open standard cables, cable assemblies, connectors, terminations and power products supporting NMEA 2000 systems. NMEA 2000 is a low-cost data network operating at 250 Kbps using a Controller Area Network CAN Integrated Circuit . It allows multiple electronic devices to be connected together on a common channel to easily share information. NMEA 2000 cables and connectors come in two styles: Mini-Change (7/8) for thick backbones and Micro-Change (M12) for thin backbones.