NMEA 2000 Micro-Change M12 Terminator Resistor, Cina NMEA 2000 Micro-Change M12 Terminator Resistor, fornitori, fabbrica-Premier Cable Co., Ltd.

Profilo Aziendale

Fondata a Dong Guan nel 2003, Premier Cable possiede circa 350 dipendenti, coprendo un'area di 9000 mm, con 10 moderne linee di produzione e la capacità di produzione annuale è di circa 12 milioni di pezzi di cavi.

Siamo un'azienda certificata NMEA 2000 Connectors and Cables che costruisce soluzioni per imbarcazioni connesse. Produciamo cavi NMEA e croci NMEA T per installazioni. Cavo di derivazione NMEA 2000, connettore NMEA T, connettore cablabile NMEA, croce a T NEMA, back bone NMEA, resistenza NMEA 2000 e terminatore NMEA ...Per visualizzare altro

IMMAGINI DEL PRODOTTO

NMEA 2000 Micro-Change M12 Terminator Resistor details

NMEA 2000 Micro-Change M12 Terminator Resistor supplier

NMEA 2000 Micro-Change M12 Terminator Resistor factory

descrizioni

Breve descrizione del prodotto

Resistore terminatore M2000 Micro-Change NMEA 12 Termination Resistor NMEA 2000 Micro-C NMEA2000 Backbone terminator NMEA2000 Inline-Terminator Male CAN terminator, provides CAN bus termination for proper working. Certified NMEA2000 - Terminators. NMEA2000 networks need terminating resistors at either end to terminate or close the NMEA2000 network and should be installed on one side of a T-connector. Specifications 120 ohm resistor Waterproof rating IP68 NMEA2000 network standard Compatible with other manufacturer's NMEA2000 products NMEA 2000 DeviceNet waterproof M12 120ohm termination resistor NMEA 2000 M12 Waterproof Connector Termination Resistor For Marine Vessel NMEA2000 Connector Termination Resistor is used to terminate a NMEA 2000 network. High quality NMEA-2000 compatible cables and connectors that are perfect for marine electronics communications. Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. Compatible with NMEA-2000 enabled chart plotters, fish finders and sounders. The range covers backbone cables, tee's, resistive terminators,elbow connectors, multi-junction connectors and starter kits. The Terminator, a M12 connector molded with a 120 ohm resistor inside it, located at each end of the NMEA 2000 backbone or other devices cable termination. Proper termination helps ensure signal integrity across the entire length of the boat backbone.