Nmea 2000 micro-change m12 terminator resistor, čína nmea 2000 micro-change m12 terminator resistor výrobci, dodavatelé, factory-premier cable co., ltd.

Profil společnosti

Společnost Premier Cable byla založena v Dong Guanu v roce 2003 a vlastní asi 350 pracovníků na ploše 9000 MM, s 10 moderními výrobními linkami a roční výrobní kapacita je asi 12 milionů kusů kabelů,

Jsme certifikovaná společnost NMEA 2000 Connectors and Cables, která vyrábí řešení pro připojené lodě. Vyrábíme kabely NMEA a křížové NMEA T pro instalace. NMEA 2000 Drop Cable, NMEA T konektor, NMEA drátový konektor, NEMA T-cross, NMEA zadní kost, NMEA 2000 odpor a NMEA terminátor ...Chcete-li zobrazit více

Fotografie výrobků

NMEA 2000 Micro-Change M12 Terminator Resistor details

NMEA 2000 Micro-Change M12 Terminator Resistor supplier

NMEA 2000 Micro-Change M12 Terminator Resistor factory

popisy

Krátký popis produktu

Terminátorový rezistor NMEA 2000 Micro-Change M12 Termination Resistor NMEA 2000 Micro-C NMEA2000 Backbone terminator NMEA2000 Inline-Terminator Male CAN terminator, provides CAN bus termination for proper working. Certified NMEA2000 - Terminators. NMEA2000 networks need terminating resistors at either end to terminate or close the NMEA2000 network and should be installed on one side of a T-connector. Specifications 120 ohm resistor Waterproof rating IP68 NMEA2000 network standard Compatible with other manufacturer's NMEA2000 products NMEA 2000 DeviceNet waterproof M12 120ohm termination resistor NMEA 2000 M12 Waterproof Connector Termination Resistor For Marine Vessel NMEA2000 Connector Termination Resistor is used to terminate a NMEA 2000 network. High quality NMEA-2000 compatible cables and connectors that are perfect for marine electronics communications. Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. Compatible with NMEA-2000 enabled chart plotters, fish finders and sounders. The range covers backbone cables, tee's, resistive terminators,elbow connectors, multi-junction connectors and starter kits. The Terminator, a M12 connector molded with a 120 ohm resistor inside it, located at each end of the NMEA 2000 backbone or other devices cable termination. Proper termination helps ensure signal integrity across the entire length of the boat backbone.